For most fitted wardrobes, the best answer is both. MFC (melamine-faced chipboard) suits the carcass and interior, where you want a hard, ready-finished surface at a sensible cost. MDF (medium-density fibreboard) suits painted, shaker or shaped doors, where you want a smooth, dense board that machines cleanly. The right split depends on your room, your door style and how the wardrobe will be used. Getting it right is a design decision, which is why we make it with you at a free design visit rather than from a catalogue.
This guide explains both boards in plain terms. It also covers chipboard versus MDF, melamine versus laminate, solid wood versus veneer, and the brass handle finishes people compare when specifying a wardrobe.
TL;DR
- MFC is chipboard with a pre-finished melamine surface. It is generally cheaper, lighter and ready to use, so it suits wardrobe carcasses, shelving and interiors.
- MDF has a smooth, uniform core with no finish of its own. It is the starting point for painted, shaker and routed or curved doors.
- Most well-specified fitted wardrobes combine the two: MFC inside, MDF or another finished facing on the doors.
- Shelf span, hinges, runners and door tracks matter as much as the board. A good board in a poor design still sags.
- Hardware finishes are a separate choice. Satin brass hides marks better than polished brass, which gives the brighter shine.
Table of Contents
- MFC vs MDF: the core difference
- Cost: what MFC and MDF really change
- Strength, sagging and the span rule
- Hinges, runners and doors: where the board meets the hardware
- Chipboard vs MDF: is MFC just chipboard?
- Melamine vs laminate: what the words mean
- Wardrobe door materials: your options
- Solid wood vs veneer: which is right for you?
- Brass hardware: satin, polished, antique and brushed
- What about brand names like Egger and Finsa?
- How to choose: a simple decision guide
- Common mistakes to avoid
- Our approach to fitted and bespoke wardrobes
- Our view on boards, design and value
- FAQ
- Sources
MFC vs MDF: the core difference
The two boards are made differently, and that explains almost everything else about them.
MFC is a chipboard core, made from wood chips, shavings and sawdust, with a decorative melamine surface already bonded on. You cut it, edge it and fit it. A UK board supplier’s guide notes that MFC arrives finished, so it needs no painting or sealing, and that it is typically the better choice for straightforward carcass work, shelving and wardrobe interiors.
MDF is made from much finer wood fibres, pressed into a dense, smooth, even board. Chipboard is built from coarser particles, while MDF is denser and smoother, which is why MDF suits painted finishes and precise machining. The same supplier guide describes MDF as the right starting point when you plan to paint or spray the finish, and as the better fit for routed edges, curved profiles and decorative moulding.
In short, MFC is a finished material and MDF is a canvas. Neither is better in the abstract. The question is what each part of your wardrobe has to do.
Side-by-side comparison
| Factor | MFC | MDF |
|---|---|---|
| Surface | Melamine, factory-applied | Bare; needs paint, veneer or a facing |
| Typical cost | Generally lower | Generally higher once finished |
| Weight | Lighter | Heavier |
| Best for | Carcasses, shelves, drawer boxes, interiors | Painted doors, shaker profiles, curves, mouldings |
| Edges | Need edge banding | Can be sprayed or routed and painted |
| Finish options | Wide range of wood effects and colours | Almost any paint colour |
| Moisture | Edges and cut faces need sealing | Cut faces and edges need sealing |
Cost: what MFC and MDF really change
MFC is generally the cheaper board, and the gap is bigger once you count finishing. MDF has to be primed and painted, veneered or faced, and that labour sits on top of the sheet price. MFC comes with its finish on.
To give a sense of scale for raw material, a UK wholesaler lists an 18mm Egger premium white MFC panel, 2800 x 2070mm, at £84.92. That is a trade sheet price at the time of the listing and it moves, so treat it as an indication of the order of magnitude, not a quote.
In a finished wardrobe, board is only part of the bill. Design time, accurate site measuring, hardware, doors, installation and the removal of an old wardrobe all matter far more to the final figure. That is why two wardrobes of the same width can cost very differently.
We do not publish fixed prices because every wardrobe is made to measure. Your quote follows a free design visit, where we measure the room and agree the layout with you.
Strength, sagging and the span rule
Homeowners often ask which board is stronger. The more useful question is how far a shelf spans without support.
Both boards are normally used at 18mm for wardrobe carcasses. A supplier of 18mm MFC suggests a safe no-sag span of around 600 to 800mm, with anything wider likely to bow over time. Long-term deflection also loosens fixings, and a bowed shelf rarely springs back.
Practical consequences:
- Plan vertical dividers. A 1,800mm wide wardrobe should not rely on one long shelf. Dividers at regular intervals keep shelves flat and also give you a natural rhythm of hanging and shelved zones.
- Think about what goes on the shelf. Folded knitwear is light. Shoe boxes, books and bags are not. Heavier loads need shorter spans or thicker or reinforced shelves.
- Do not blame the board alone. A saggy shelf is usually a span problem, not a material problem.
This is one of the main reasons made-to-measure work beats off-the-shelf units. When we design the interior, the dividers, shelves and rails are set to your room and your belongings, so spans stay short where the load is heavy.
Hinges, runners and doors: where the board meets the hardware
A board only performs as well as the fittings that hold it. A few reference points are worth knowing.
Hinges. Wardrobe doors typically use 35mm concealed cup hinges. UK trade guidance on hinge counts suggests two hinges for doors up to 900mm, three up to 1,600mm, four up to 2,000mm and five up to 2,400mm. Tall floor-to-ceiling doors need more hinges to stop sag and pull-out, and a dense, heavy MDF door needs them more than a light one.
Drawer runners. The same guidance says runners should match or sit slightly shorter than the internal depth, that full-extension runners let the drawer pull out completely, and that a typical pair carries 30 to 50kg. Full extension matters in a deep wardrobe, because you can reach the back of the drawer without kneeling.
Soft-close. Soft-close mechanisms are standard on our wardrobes. They stop doors and drawers slamming, and they reduce wear on hinges and carcass joints over the years.
Sliding doors. A sliding wardrobe depends on a dead-level top track, and typical residential systems are rated at roughly 25 to 50kg per door panel. A heavier mirrored or glass door needs a more robust track. Our sliding wardrobes are fitted to your room with that levelling done on site. If you are weighing sliding against hinged doors for a smaller bedroom, our guide to whether sliding wardrobes save space covers it.
Chipboard vs MDF: is MFC just chipboard?
Yes and no. Chipboard is the core material. MFC is chipboard with a melamine face. So when you see “chipboard vs MDF”, you are comparing the cores, and when you see “MFC vs MDF”, you are comparing the finished products.
The practical differences:
- Texture. Chipboard has a coarser, more open structure. MDF is fine and uniform, so edges can be routed, shaped and painted cleanly.
- Weight. Chipboard is lighter than MDF at the same thickness. Across a full run of wardrobes, that is a real difference for the people lifting and fitting every panel.
- Finish. Raw chipboard is rarely used as is. Faced with melamine, it becomes MFC and is ready to fit.
If a quote simply says “chipboard”, ask whether it is faced and what the faces are. A bare board in a bedroom is not what you want.
Melamine vs laminate: what the words mean
These two words are often used as if they were the same, and they are not.
Melamine is a resin-impregnated decorative paper fused onto a board. In MFC the board is chipboard. The surface is thin, hard and practical, and it comes in a very wide range of colours and wood-effect finishes. It is the standard surface for wardrobe interiors and carcasses, and it is easy to wipe clean.
Laminate, in the high-pressure sense, is a thicker, tougher sheet made from layers of paper and resin under pressure, then bonded to a core such as MDF or plywood. It is used where a surface takes heavy wear, such as worktops. In a bedroom, the difference in everyday durability is small, because wardrobe surfaces are not worktops.
For a wardrobe, the choice is more about look, texture and edge detail than about durability. A good designer will show you real samples of the finish so that you can judge colour and texture in your own light. We bring them to your design visit.
Wardrobe door materials: your options
Doors are the part of the wardrobe you see every day, so the door material is where the visual decision happens.
Painted MDF
Painted MDF is the usual choice for shaker doors and routed profiles. The dense, even surface takes a sprayed finish well, and you can match nearly any colour. If you are looking at shaker fitted wardrobes for a period property in Richmond, Chiswick or Fulham, this is the route most designs take.
Wood-effect MFC
Wood-effect finishes have improved a great deal. They suit modern, flat-fronted designs and are a practical choice for a busy family bedroom, because the surface is already hard-wearing. For clean, modern lines with no visible handle, this is a natural fit.
Veneer
Veneer is a thin layer of real wood on a more stable base. Veneer costs less than solid wood and is a thin layer of real wood over a cheaper base, though it can peel or suffer water damage. In a bedroom, away from steam and splashing, that moisture risk is minimal, and you get genuine grain and warmth.
Solid wood
Solid wood has real presence and can be refinished if it shows wear. The same source notes that it is the most expensive option, is heavier, and can warp or expand in changing humidity. For that reason, solid timber is often used for frames, mouldings or feature elements, while large door panels are made from stable engineered boards.
Glass and mirror
Mirrored and glass sliding doors bounce light around and make a small room feel larger. Weight is the thing to plan for, since heavier doors need a more robust track.
Solid wood vs veneer: which is right for you?
This comes up often with homeowners looking at premium finishes. A simple way to decide:
- Do you want to refinish it in 20 years? Solid wood can be sanded and refinished. Veneer can be touched up, but it is harder to repair if damaged.
- Is the room humid? A dressing room next to a bathroom should favour stable, well-sealed finishes. A standard bedroom is not an issue.
- Is a consistent look important? Veneer gives a more uniform appearance across big door panels. Solid wood varies from board to board, which some people love.
- What is your budget? Veneer is the more economical way to get real timber across a whole wall of doors.
For a full-height wall of fitted wardrobes, many clients choose the engineered-board route with a premium face, and keep solid timber for details.
Brass hardware: satin, polished, antique and brushed
Handles and rails complete the look, and brass finishes are popular in west London homes. The names overlap, so here is how they differ.
- Polished brass is bright and reflective. It makes a bold statement but shows fingerprints, and it needs more frequent cleaning to keep its shine.
- Satin brass has a soft, muted, brushed texture. It is lower maintenance and hides fingerprints and light scratches better, which suits handles that you use several times a day.
- Brushed brass is very close to satin: a fine, directional grain with a soft glow. Many suppliers use the two names almost interchangeably, so check the sample.
- Antique brass is a darker, aged, warmer tone. It suits period interiors, traditional shaker doors and deeper paint colours.
As a rule, match the handle to the room. Satin or brushed brass sits well on modern flat doors and on muted paint colours. Polished brass lifts dark colours such as deep green or navy. Antique brass belongs in traditional schemes. Whichever you choose, look at a physical sample next to the actual door finish before you decide.
What about brand names like Egger and Finsa?
You may see board manufacturers named on specifications. They are major European makers of decorative boards, and each has a large palette of colours and textures. For a made-to-measure wardrobe the more important questions are the finish you want, how the edges are handled, and how the whole design is built, since the best colour on a poorly designed carcass will not last. You can see the colours in person at your design visit.
How to choose: a simple decision guide
Start with the door style, then work back to the carcass.
- Painted or shaker doors: MDF doors, MFC carcass and interior.
- Modern flat doors: wood-effect or plain-colour finished doors, MFC carcass.
- Real timber look on a budget: veneer on a stable board.
- A statement piece with a high-end feel: a mix of solid timber details, painted finishes and well-chosen hardware.
- Sloped ceilings or alcoves: the shape drives the design more than the board. See below.
Loft and sloped ceilings
A loft wardrobe is built to follow the angle of the roof, so panels are cut to unusual dimensions. A stable, accurately cut board and a clear plan for the eaves matter more than the label on the sheet. Low eaves space is great for drawers and shoe storage, while the tall side takes hanging rails.
Alcoves and awkward spaces
Chimney breasts rarely have straight walls. A made-to-measure build scribes the units to the wall so that there are no gaps. We build for exactly these shapes, and our awkward spaces service includes under-stair storage.
Small bedrooms
Floor-to-ceiling units use height that freestanding furniture wastes. Sliding doors remove the swing space for doors. Mirror fronts add light.
Common mistakes to avoid
- Specifying one board for everything. Using painted MDF throughout when MFC would serve inside adds cost and weight with no gain.
- Ignoring spans. Wide shelves without dividers will bow.
- Forgetting the edges. Exposed edges of any board need proper edging or sealing, particularly near bathrooms.
- Choosing a finish from a screen. Colours change in daylight. Always view a sample in the room.
- Underspecifying hardware. Hinges, runners and tracks carry the load every day.
- Skipping the old wardrobe. Removal and disposal are part of a clean job, so make sure they are included.
Our approach to fitted and bespoke wardrobes
We design wardrobes around your room, and the board choice follows from the design rather than the other way round. Our fitted wardrobes are made to measure for bedrooms, lofts, alcoves and dressing rooms, and our walk-in wardrobes are laid out with shelving, rails, drawers and shoe storage to suit how you dress.
Here is what you can expect:
- A free design visit, where we measure your room and talk through layout, finishes and doors.
- Soft-close mechanisms as standard.
- Installation typically within seven days.
- A 10-year guarantee.
- Removal and disposal of your old wardrobe.
We work across west London and surrounding areas, including Richmond, Wimbledon, Putney, Kingston, Chiswick, Fulham, Chelsea, Ealing, Twickenham, Barnes and Hammersmith. If you are also planning a feature wall, see our TV media wall project, which uses the same made-to-measure approach.
To arrange a free design visit, call 07468 150807 or message us on WhatsApp. You can also visit us at 124 City Road, Kemp House, London, EC1V 2NX.
Our view on boards, design and value
Clients often arrive asking which board is best. We understand why, but we usually steer the conversation to the room first.
A wardrobe is a piece of furniture you use twice a day for years. It has to fit the walls you have, with their slopes, alcoves and odd corners. It has to carry the weight of what you own. It has to look right next to your floor, your paint and your light. Those decisions shape the result far more than the name of the board.
That is why we begin with a design visit. We measure, we talk through how you dress and what you store, and then we propose a layout. The materials follow: a hard-wearing finished interior, doors in the style you want, and soft-close fittings as standard.
We stand behind the result with a 10-year guarantee, and we aim to install typically within seven days, so you are not living in a building site for weeks. We take away your old wardrobe too.
If you are comparing options for a bedroom, loft or dressing room, we would be glad to show you samples in your own space.
Aureliu
FAQ
Is MFC or MDF better for wardrobes?
Neither wins outright, because they do different jobs. MFC is the practical choice for carcasses, shelves and interiors because it comes ready-finished. MDF is the better base for painted, shaker or shaped doors. Most good fitted wardrobes use both.
Is MFC cheaper than MDF?
Generally yes, particularly once finishing is counted. MDF needs painting, veneering or facing, while MFC is finished at the factory. The final price of a wardrobe depends far more on design, hardware and installation than on the board, so the best way to know is a measured quote.
Will MFC or MDF sag?
Any 18mm board sags if a shelf spans too far. A supplier guide suggests keeping unsupported spans to roughly 600 to 800mm. Vertical dividers solve this, and a made-to-measure design builds them in.
What is the difference between melamine and laminate?
Melamine is a thin, hard decorative surface fused onto a board such as chipboard, giving MFC. High-pressure laminate is a thicker sheet bonded to a core and used where surfaces take heavy wear. For wardrobes the choice is mostly about look and feel.
Which brass finish is best for wardrobe handles?
Satin or brushed brass hides fingerprints and light marks, so it suits handles you touch daily. Polished brass gives a brighter shine but needs more cleaning. Antique brass suits traditional and period schemes.